The synthetic high-temperature heat - conducting oil DR340-WE is carefully formulated by using high-quality, high-efficiency and energy-saving base oils and adding a variety of special-effect additives. It has many times incomparable characteristics of general mineral oil-based products. Its high-quality quality conforms to international standards ISO6743 / 12 and GB23971-2009 Standard specifications.
1. Appropriate viscosity: Low-viscosity heat transfer medium is conducive to achieving a high heat transfer coefficient under turbulent conditions, has good pumpability at low temperatures, and makes the pumping device easy to start;
2. Higher specific heat and thermal conductivity to facilitate higher thermal efficiency;
3. Excellent high and low temperature performance and excellent viscosity-temperature characteristics: small change in viscosity with temperature, good low-temperature fluidity, high flash point and spontaneous ignition point, high degree of thermal decomposition, can meet the high-temperature use requirements of 320 ℃ in the pipeline , Has super flame resistance;
4. Excellent chemical stability and thermal stability, remove the light and heavy components of the base oil, so that it has lower volatility and higher temperature resistance than other synthetic heat transfer oils;
5. Its anti-oxidation performance is 8-10 times higher than mineral oil, and its unique molecular structure ensures that it will not produce sludge during the effective use period;
6, good radiation resistance and adaptability to rubber seals.
The synthetic high-temperature heat - conducting oil DR340-WE is suitable for liquid-phase heat-conducting systems whose temperature is not higher than 330 ℃ for a long time. Recommended for electronic materials, petrochemicals, copper clad laminates, circuit boards, coating resins, leather, rubber, food, textile, printing and dyeing, etc. that require high stability.
Fourth, matters needing attention
1. It should be stored indoors. If it is stored in the open air, it should be kept horizontal to avoid water immersion and annihilation of signs on the barrel.
2. It is forbidden to contaminate with water and foreign matter, otherwise it will cause oil deterioration and failure;
3. Do not mix with other oil products to prevent performance deterioration.